Send E-mail to friend
We are at FB too...
FEETECH RC Servo Electronic Products
-One SCPC-1 USB interface device
-One User’s Manual
The latest version of the software for the SCPC-1 is available on the FEETECH RC MODEL Website (Click here to download)
Using this USB interface to program FT programmable servo and to test “all brand”servo.
Please read the manual (Click here to download)before useing the software and your new SCPC-1.
This SCPC-1 will allow you to easily check any servo brand’s servo performance by using servo test functions and set most of the programmable parameters of all FT digital servo types as noted in the following statement.
Required Optional Parts (Sold Separately)
- “Y” cable or USB extension cable
-One 4.8V or 6V “receiver” battery*.
*The SCPC-1 requires an external power source in order to test/program a servo.
WARNING: Be sure to use a fully-charged battery to prevent any data loss or damage during the programming process
Basic Set–Up Instructions
1. Download the SCPC-1 program software(ServoPC) from www.feetechrc.com. The SCPC-1 software is compatible with Windows XP, W7 and VISTA.
2. Plug the SCPC-1’s USB interface into your PC.
3. Start the ServoPC software from your PC.
4. Plug an external power source pack (4.8V or 6V battery) into the SCPC-1 ‘-+-’ slot.
5. A servo must be plugged into slot “S” in order to program or to test. The SCPC-1 supports only program one servo at a time.
FEETECH RC FE-SCPC-1 USB interface Programming for FEETECH Programmable Servo
1.Input6V~20V(The voltage of your servo can work on)
2.BEC output current 2A to Receiver
3.BEC output voltage 5V
4. Interface like JR
5.Wire length 30mm(or Special requirement)
6 Wiring Method
7.1 Please don’t let the battery voltage >20V
7.2 Not allow battery voltage > HV servo max voltage
7.3 The BEC is supply to receiver, can’t load the high torque servo
FEETECH RC FE-DPC-1 Direct Power Supply Connector with BEC X 1 output voltage 5V Wire 30mm
FEETECH RC FE-DPC-4 Direct Power Supply Connector with BEC X 4 output voltage 5V Wire 30mm
Website http://www.v-dezign.se E-Mail email@example.com Phone +46 (0) 520 18857 Fax + 46 (0) 520 411169 The company is approved for F-tax and holding VAT registration number © 2004 - 2013 Europe And Asia Corner KB Sweden Webhosting via http://www.one.com E-Commerce via http://www.shopfactory.com